Clarification from the agency

(1) Arkansas Army National Guard (AR ARNG) Technicians; (2) All members of the AR ARNG, (3) Individuals who are not members of the National Guard but who are eligible to acquire membership in an available and compatible military grade for excepted technician positions. (Upon selection, must be a member of the AR Army National Guard).

1. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
2. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
3. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
4. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
5. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
6. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
7. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned.
8. Performs other duties as assigned.

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.

Military Grades: Enlisted

Minimum Grade - PVT (E-1)
Maximum Grade - SGM (E-9)

Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard.

IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.

ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION

Qualifications

GENERAL EXPERIENCE:
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.

SPECIALIZED EXPERIENCE:
Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, general and specialized experience):

• Thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.
• Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles and equipment.
• Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems.
• Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
• Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards.
• Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
• Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer computerized diagnostic equipment and embedded diagnostics.
• Ability to utilize, interpret and apply parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, diagnostic computer information, and schematics.